Winchester Canada Service and Repair


WHERE TO OBTAIN SERVICE:  As an owner living in Canada, if your Winchester firearm should require repair, send or deliver the complete firearm to the Authorized Repair Center (ARC) located nearest you. These centers are authorized by the Canada office of Winchester Repeating Arms, the maker of Winchester brand rifles and shotguns. Lists of Authorized Repair Center addresses are subject to change without notice.

MAINTENANCE: The gun owner is responsible for periodic inspection and proper maintenance by a qualified gunsmith to ensure that this firearm remains in proper adjustment and that worn parts are replaced. Authorized Repair Centers are geographically located to afford the owners of both new and old Winchester firearms professional repair in the shortest possible time. These gunsmiths have been thoroughly indoctrinated in factory repair techniques. They are equipped to perform work at competitive prices.

For questions regarding service or repair contact one of the service centers below or contact the Canada offices of Winchester Repeating Arms. 

Winchester Repeating Arms Canada (Browning Canada Sports Ltd./Ltee)
5583 Chemin St-François
St-Laurent, Quebec H4S 1W6
514-333-7261

service.canada@winchesterguns.com


Canada Service Centers

Bashaw Sports Centre
5012 50th St Box 126
Bashaw, AB  T0B 0H0
ph 780-372-4440
fax 780-372-4447
Email

Jennings Outdoor Sports
1603 Laveau Road
Pritchard, BC  V0E 2P0
ph 250-434-0241
Website

L'Armurier Alain Bouchard, Inc.
420 Route 143
Ulverton, QC  J0B 2BO
ph 819-826-6611
fax 819-826-6885

Pylinski Arms Gunsmithing
967 Anderson Highway
Cumberland, VA  23040
ph 804-357-2393
fax 804-492-3124
Email

Reliable Gun and Tackle
3227 Fraser
St Vancouver, BC  V5V 4B8
ph
 604-874-4710

Salt Lake Guns LTD
Box 90 NE-35-30-3-W3
Hanley,  SK  S0G 2E0
ph 306-544-2426

W R Longs LTD
4992 Rice Lake Drive North
Bewdley, ON  K0L 1E0
ph 905-797-2700
Email


Current and Obsolete Winchester Firearms Parts

If you require parts for earlier Winchester rifles and shotguns, please contact the company listed below. This is where you will find parts for most Winchester brand firearms manufactured in the United States prior to approximately 2007.

In addition to parts for current Winchester firearms, you may also obtain parts and service for the U.S. manufactured, very early Model 12s, and 42s as well as U.S. Repeating Arms-produced (New Haven, CT) Model 94s, 9410s, 9422s, or 9417s. 

Western Gun Parts Ltd.
18124 – 107 Avenue
Edmonton, AB  T5S 1K5
Phone: 780-489-5711
Fax: 780-489-5717


Returning your firearm for service in Canada.

When returning your Winchester to the Canada office of Winchester Repeating arms for service or repair always follow the instructions below. 

When returning your firearm for service, be sure to follow the guidelines below.

WARNING! MAKE SURE THE FIREARM IS UNLOADED PRIOR TO PACKAGING!

  • Be sure to send in the complete firearm.
  • Keep a record of your serial number prior to packaging your firearm for shipping.
  • Remove all aftermarket accessories prior to packaging the firearm, including scopes, bases, rings, slings, etc.
  • The Browning Service Department is not responsible for damage incurred during shipping. Make sure your firearm is adequately packaged and insured before shipping.
  • Do not ship firearms inside hard cases.
  • Retain your tracking information from the shipper.
  • Include a copy of your valid PAL.
  • Any firearms that have been altered outside of factory specifications may be returned to factory specifications at owner’s expense. EXAMPLE: Altered or modified triggers, barrel modifications, etc.

IMPORTANT: WINCHESTER REPEATING ARMS IS NOT RESPONSIBLE FOR DAMAGE INCURRED DURING SHIPPING.


Parts Lists and Schematics

Currently, there are only a few Winchester firearms with a parts list and schematic available for downloading. We are working to improve this with current products in the works. For obsolete products, it is best to contact our listings for dealers providing services and parts for obsolete firearms.