- Home
- Wildcat 22
- Wildcat 22 Scope Combo
- Home
- Products
- Rifles
- Wildcat 22
- Wildcat 22 Scope Combo
Wildcat 22 Scope Combo
Wildcat 22 Scope Combo
2024 SHOT Show Special – A host of features includes a field removable lower receiver, ambidextrous magazine release, easy-to-load rotary magazine, semi-automatic, integral Picatinny top rail on receiver, rear barrel access for easy cleaning. Rugged molded polymer stock with front and rear sling eyelets, Picatinny rail on underside of forearm (includes rail cover). Includes Vortex Crossfire II 2-7 x 32mm optic, ghost ring rear sight and ramped post front sight and one 10 round rotary magazine.
Overview
Overview
You have not seen, nor held, nor shot anything like the Wildcat™. Winchester Repeating Arms® has been building legendary rimfires for more than a century, but this rifle has taken the rimfire autoloader to a whole new level of value and performance. Speaking of value, this rifle and scope combo combines the straight shooting Wildcat topped off with a pair of sturdy rings and a quality Crossfire scope from Vortex. The scope is already bore sighted, leaving the fine tuning up to you.
The Wildcat doesn't just look different, it is different. Through the extensive use of tough polymers and modern design principles, the Wildcat has a number of features you just don't see with other rifles. Like a centerfire rifle, the Wildcat is a striker-fired design – not hammer fired – for improved trigger performance with faster locktime and a lighter pull weight. A hemispherical firing pin offers improved reliability with rimfire ammunition.
The lower receiver assembly contains the trigger group, reversible safety and bolt assembly and is easily removed for service with the push of a button. With the lower receiver assembly removed, the bore can be cleaned from the chamber end. The polymer upper receiver assembly features an integrated Picatinny rail for optics. Dual, ambidextrous magazine releases and easy to reach bolt lock and release buttons make operation easy.
The Wildcat features a durable, 10-round polymer magazine. The rotary design is reliable, easy to load and has a bolt stop that locks the bolt back after the last round has been fired. The Wildcat also accepts magazines that fit 10/22® rifles.
A wide range of shooters will appreciate the comfortable fit of the tough polymer stock. The lightweight stock design also contributes to the approximately four pound weight of the Wildcat. The steep grip angle improves finger-to-trigger reach. Need a little extra length of pull or height added to the comb for optics? A length of pull spacer that adds 3/4" to the stock is available, as is a clip on cheek riser that raises your cheek 1/2".
Wildcat 22 Scope Combo Features
Wildcat 22 Scope Combo Features
- Molded gray polymer stock
- Front and rear sling eyelets
- Picatinny rail on underside of forearm, includes rail cover
- Includes Vortex Crossfire II 2-7 x 32mm optic
Wildcat Features
Wildcat Features
- Reliable blowback semi-automatic operation
- Drop-out lower receiver assembly for easy cleaning
- Rugged polymer receiver with integral Picatinny top rail
- Precision button-rifled barrel with recessed target crown
- Striker-fired design with hemispherical firing pin tip
- Fully-Adjustable Ghost Ring rear sight and ramped post front sight
- Integral Picatinny Sight Rail
- 10-Round Rotary Magazine with Polymer Body and Metal Feed Lips
- Fully Ambidextrous Magazine Release
- Spring Assisted Magazine Ejection
- Reversible Manual Safety Button
- Accepts aftermarket 10/22 magazines
Item Number 521155102 | UPC 048702027116 |
Caliber 22 LR | Barrel Length 18" |
Overall Length 36 1/4" | Length of Pull 13 1/2" |
Drop at Comb 7/8" | Drop at Heel 7/8" |
Weight 4 lbs 0 oz | Magazine Capacity 10 |
Twist Rate 16" | Barrel Finish Matte Blued |
Stock Finish Gray | Receiver Finish Matte Black |
Barrel Material Steel | Barrel Contour Sporter |
Stock Material Composite | Recoil Pad Plastic Butt Plate |
Checkering Textured Grip Panels | Sling Swivel Studs Integrated Composite |
Receiver Material Black Composite | Trigger Finish Matte Black |
Bolt Slide Finish Matte Black | Magazine Type Detachable |
Trigger Material Polymer | Trigger Guard Material Composite |
Trigger Guard Engraving None | Drilled and Tapped for Scope Rail |
MSRP $449.99 |